Advanced Solutions of Microsoft Exchange Server 2013
Question No: 81 – (Topic 6)
You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table.
All mailbox servers are members of a database availability group (DAG) named DAG1. DAG1 has Datacenter Activation Coordination (DAC) mode enabled. The data center in Dallas experiences a power failure, causing quorum to be lost.
You need to mount the databases in the data center in Houston. Which command should you run first?
Stop-DatabaseAvailabilityGroup -Identity DAG1 -MailboxServer EX1 -ConfigurationOnly.
Restore-DatabaseAvailabilityGroup -Identity DAG1 -ActiveDirectorySite Exchange-Site
-AlternateWitnessServer -AlternateWitnessDirectory D:\DAG1
Stop-DatabaseAvailabilityGroup -Identity DAG1 -ActiveDirectorySite Exchange-Site
Stop-Service -DisplayName ClusSvc -Force.
When the DAG is in DAC mode, the specific actions to terminate any surviving DAG members in the primary datacenter are as follows:
The DAG members in the primary datacenter must be marked as stopped in the primary datacenter. Stopped is a state of Active Manager that prevents databases from mounting, and Active Manager on each server in the failed datacenter is put into this state by using the Stop-DatabaseAvailabilityGroup cmdlet.
Reference: Datacenter Switchovers
Question No: 82 – (Topic 6)
Your company acquires a new internet domain name.
You need to ensure that all users can receive email messages sent to the new domain name.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two).
Modify the email address policy.
Create an Authoritative accepted domain.
Create an External Relay accepted domain.
Modify the properties of the default Receive connector.
Generate a new Exchange certificate that contains the new domain name.
Question No: 83 DRAG DROP – (Topic 6)
You have an Exchange Server 2013 database availability group (DAG). Each member of the DAG has two network interfaces named Network1 and Network2. Network1 is used for
You discover that replication traffic is sent over Network1.
You need to ensure that all of the database replication traffic is sent over Network2. The solution must minimize database replication downtime.
Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Question No: 84 – (Topic 6)
All users are issued certificates from an Active Directory Certificate Services (AD CSgt; certification authority (CA).
You need to ensure that users can send digitally-signed messages from Outlook Web App. Which cmdlet should you use?
Answer: A Explanation:
Question No: 85 – (Topic 6)
Your company has offices in Tokyo, Bangkok, and Shanghai.
All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the offices connect to each other by using a WAN link.
The network contains 10 servers that have Exchange Server 2010 installed. The servers are configured as shown in the following table.
The servers will be configured as shown in the following table.
Each site has an IP-PBX that provides telephony services for the mailboxes in that site by using unsecured SIP over TCP 5070. The IP-PBX uses the same port to connect to multiple SIP peers.
You need to recommend which tasks must be performed to ensure that the Unified Messaging (UM) features are available to the mailboxes if a single server fails.
Which three actions should you include in the recommendation? (Each correct answer presents part of the solution. Choose three.)
Configure the Exchange Server 2013 Mailbox servers to listen to unsecured SIP on TCP 5070.
Configure the Exchange Server 2013 Client Access servers to listen to unsecured SIP on TCP 5070.
Install the Client Access server role on the Exchange Server 2013 servers in the Shanghai and Bangkok offices.
Configure the Exchange Server 2013 Mailbox servers as additional SIP peers that contain new pilot identifiers.
Configure the Exchange Server 2013 Client Access servers as additional SIP peers that contain new pilot identifiers.
Answer: B,C,E Explanation:
Exchange 2013 Unified Messaging offers administrators:
/ A complete voice mail system
Unified Messaging offers a complete voice mail solution using a single store, transport, and directory infrastructure. The store is provided by a Mailbox server and forwarding of incoming calls from a VoIP gateway or IP PBX is handled by a Client Access server. All
/ An Exchange security model
The Microsoft Exchange Unified Messaging service on a Mailbox server and the Microsoft Exchange Unified Messaging Call Router service on a Client Access server run as a single Exchange server account.
The client access server (CAS) is a server role that handles all client connections to Exchange Server 2010 and Exchange 2013. The CAS supports all client connections to Exchange Server from Microsoft Outlook and Outlook Web App, as well as ActiveSync applications. The CAS also provides access to free/busy data in Exchange calendars.
The CAS is one of five server roles in Exchange Server 2007 and Exchange 2010, and one of two server roles in Exchange Server 2013. It must be installed in every Exchange Server organization and on every Active Directory (AD) site that has the Exchange mailbox server role installed.
Question No: 86 DRAG DROP – (Topic 6)
You work for a financial services company that has an Exchange Server 2013 organization. Mailbox audit logging is enabled for all mailboxes.
The company identifies the following requirements for the sales department:
-> The manager of the sales department must be able to search for email messages that contain specific key words in the mailboxes of the users in the sales department.
-> The manager of the human resources department must receive a report that
contains a list of all the sales users#39; mailboxes that were searched by the sales manager.
You need to identify which tasks must be performed to meet the requirements. Which tasks should you identify?
To answer, drag the appropriate task to the correct requirement in the answer area. Each
Question No: 87 DRAG DROP – (Topic 6)
You are an administrator for a company named Contoso, Ltd. The company is an international reseller that has offices worldwide. One of the offices is located in France.
Each office contains several servers that have Exchange Server 2013 installed. The Exchange Server organization is configured for Unified Messaging (UM). Each office contains an IP-PBX device.
You need to ensure that callers to the France office can navigate the voice mail system menu in French.
In which order should you perform the actions?
To answer, move all actions from the list of actions to the answer area and arrange them in
Question No: 88 – (Topic 6)
You have an Exchange Server organization that contains four servers. The servers are configured as shown in the following table.
You are deploying Unified Messaging (UM).
You need to ensure that all voice mail sent to the existing extension of a user is delivered to the user#39;s mailbox.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
Create a UM hunt group
Create a UM IP gateway.
Configure the IP-PBX to route calls to EX3 and EX4
Configure the IP-PBX to route calls to EX I and EX2.
Assign EX I and EX2 to UMPlan1.
Assign EX3 and EX4 to UMPlan1.
Answer: A,B,C Explanation:
When you’re setting up Unified Messaging (UM), you must configure the IP PBXs on your network to communicate with the Client Access servers running the Microsoft Exchange Unified Messaging Call Router service and the Mailbox servers running the Microsoft Exchange Unified Messaging service in your Exchange organization. You must also configure the Client Access and Mailbox servers to communicate with the IP PBXs.
C: A Unified Messaging (UM) IP gateway represents a physical Voice over IP (VoIP) gateway, IP Private Branch eXchange (PBX), or session border controller (SBC) hardware device.
Here are the basic steps for connecting VoIP gateways, IP PBXs, SIP-enabled PBXs, or SBCs to Client Access and Mailbox servers:
Step 1: Install the Client Access and Mailbox servers in your organization.
Step 2: Create and configure a Telephone Extension, SIP URI, or E.164 UM dial plan. Step 3: Create and configure a UM IP gateway. You must create and configure a UM IP gateway for each VoIP gateway, IP PBX, SIP-enabled PBX, or SBC that will be accepting incoming calls and sending outgoing calls.
Step 4: Create a new UM hunt group if needed. If you create a UM IP gateway and don’t specify a UM dial plan, a UM hunt group will be automatically created.
The question states, 鈥淵ou need to ensure that all voice mail sent to the existing extension
of a user is delivered to the user#39;s mailbox鈥? The dial plan is therefore a Telephone Extension dial plan. Client Access and Mailbox servers cannot be associated with Telephone Extension or E.164 dial plans.
Question No: 89 DRAG DROP – (Topic 6)
Your company has two offices. The offices are located in New York and San Francisco.
You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.
The organization contains four mailbox databases. The mailbox databases are configured as shown in the following table.
Recently, DB1 went offline because of a disk failure. The disk is restored and DB1 is mounted.
You need to preserve the messages and perform the following actions:
-> Export the messages queued for delivery to a different drive.
-> Clear the messages queued for delivery.
-> Ensure that the messages queued for delivery to DB1 are delivered while preserving the original message header information.
-> Prevent duplicate messages.
Which four actions should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order.)
Question No: 90 – (Topic 6)
You need to prevent a user named User1 from permanently deleting an email message in his mailbox.
What should you do on the mailbox of User1?
Implement a retention policy.
Configure a retention hold.
Implement a data loss prevention (DLP) policy.
Configure an in-place hold.
Answer: D Explanation:
In Exchange 2013, you can use In-Place Hold to accomplish the following goals: Place user mailboxes on hold and preserve mailbox items immutably
Preserve mailbox items deleted by users or automatic deletion processes such as MRM Use query-based In-Place Hold to search for and retain items matching specified criteria Preserve items indefinitely or for a specific duration
Place a user on multiple holds for different cases or investigations
Keep In-Place Hold transparent from the user by not having to suspend MRM Enable In-Place eDiscovery searches of items placed on hold
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|