Software Testing with Visual Studio 2012
Question No: 31
You are a test developer using Microsoft Test Manager (MTM). You have copied a test case that has five parameters.
You need to change the parameter names in the new test case and keep the parameter values intact.
What should you do?
For each parameter, click Rename parameter in the Parameter Values pane.
Replace the existing parameters with new, renamed parameters.
Edit each test step and rename the parameters.
Copy and paste the data values from the old parameters into new parameters.
Explanation: To rename a parameter, choose the parameter in one of the rows in Parameter Values and then choose Rename parameter.
The Rename parameter dialog box is displayed. You can then change the name of your parameter throughout your shared steps.
Reference: How to: Add Parameters to Shared Steps
Question No: 32
Your company uses Lab Center during manual- and automated-testing processes for different types of testing environments.
Development operations is standardizing their processes. They want to document their best practices for environment setup.
You need to verify your setup of a standard environment, which consists of physical servers that match your production environment. However, you are unable to connect to your new lab environment.
Which action in Lab Center should you perform in order to troubleshoot the problem?
Explanation: Q: The status of my lab environment is Not Ready. What should I do? A: On the context menu of the environment, choose Repair. The repair will take a few minutes.
This status means that the test agent is not installed and correctly configured on one of the machines in the environment. The repair operation logs into the machines and installs and configures the agent.
Not C: It is stated that the problem is that we are unable to connect. Choosing to connect again would not help.
Reference: Standard lab environments
Question No: 33
You are using Microsoft Test Manager (MTM).
Your testing team is creating test cases for an application.
You need to assign the state of the test suite that contains test cases that are unavailable to run.
Which state should you assign?
Explanation: Use In Planning if you are not yet ready to run the tests linked to this requirement.
Reference: How to: Add Requirements or User Stories to Your Test Plan
Question No: 34
You are using Microsoft Test Manager (MTM) to manually test for an ASP.NET website. You have previously created a test plan named QA Release 1.0 that contains 115 test cases, and you are now planning the testing for Release 2.0.
The QA Release 2.0 test plan must meet the following requirements:
->All the test cases in QA Release 1.0 should be available in QA Release 2.0.
->Testers should be able to change, add, or remove test cases from either the QA Release 1.0 test plan or the QA Release 2.0 test plan as required, without affecting the other test plan.
->Shared steps and test configuration from the QA Release 1.0 test plan need to be reflected in QA Release 2.0 test plan.
You need to facilitate simultaneous testing of the website by creating the QA Release 2.0 test plan according to the stated requirements.
What should you do?
Copy the root test suite from the QA Release 1.0 test plan into the QA Release 2.0 test plan.
Clone the root test suite from the QA Release 1.0 test plan into the QA Release 2.0 test plan.
Copy all the test cases from the QA Release 1.0 test plan into the QA Release 2.0 test plan by using the Create copy option in Test Case Manager.
Export all the test cases from the QA Release 1.0 test plan into Excel, then import them into the QA Release 2.0 test plan.
Explanation: Cloning test suites by using tcm.exe (copy by value or deep copy) creates new test cases in the destination test plan. These new test cases are copies of the test cases in your source test plan. After the copy, you can edit the test cases in either plan without affecting the other. Cloning test suites is useful when you want to work on two differing releases simultaneously. The source and target suites must be in the same team project collection.
Reference: Copying and Cloning Test Suites and Test Cases
Question No: 35
You are the product manager for Contoso, Ltd. You are using Microsoft Visual Studio to develop a new product.
Management wants to extend the audience for the new product to include Windows 8 devices. The development team creates an alpha copy of the application for initial testing. A main requirement is to test the application on a device that has never been used for testing.
You need to configure the device for testing after installing the remote debugger. Which application should you use?
Microsoft Test Manager
Windows App Studio
Your Windows Store App
Microsoft Test Tools Adapter
Question No: 36 DRAG DROP
Your team uses Microsoft Test Manager (MTM) to manage test cases.
You are creating manual test cases so that your team can run the tests as part of the test process.
You need to ensure that testers have to specify whether a test step passes or fails before they finish running the test case.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Step 1: Add a manual test case to your test plan.
Step 2-3: Add the steps to perform during the test. Don’t forget to include the expected results.
Question No: 37
You are using Microsoft Test Manager (MTM).
You plan to redesign a group of test cases that have similar steps but test for different conditions.
You need to make the test cases easy to maintain. What should you do?
Create a shared steps work item from the Shared Steps Manager view for every test case in the group and replace the test steps in the appropriate test case.
Convert the manual test cases to automated tests.
Open a test case, create a shared steps work item from the recurring test steps, and reuse this shared steps work item for the other test cases in the group.
Find recurring test steps in the test cases and use them to create new test cases. Replace the recurring test steps with a reference to the new test cases.
Explanation: * When you plan manual tests there are some sequences of steps, such as logging in, that occur in many test cases. To avoid having to enter these sequences again and again, create shared steps.
Create shared steps
While you’re editing a test case, select a sequence of steps that you want to share. The steps you selected are replaced with a link to the new shared steps work item.
Use shared steps
Now you can use the shared steps in another test case. Reference: Share steps between test cases
Question No: 38
You are using Microsoft Test Manager (MTM). You are using the Microsoft Visual Studio Scrum 1.0 process template.
You are developing a test from an engineering document that has detailed verification information.
You need to ensure that the document is directly accessible whenever a tester runs a specific step.
What are two possible ways to accomplish this goal? (Each correct answer presents a complete solution. Choose two.)
Add a test step attachment.
Add a test case attachment.
Add a tested backlog items link.
Add a test case link.
Answer: A,B Explanation:
B: Adding Details, Attachments, or Hyperlinks to a Test Case
You can add information to a test case that provides more information to implement the test case. You add details to test cases in the following ways:
In the Description or History field, type information.
Attach a file.
For example, you can attach an e-mail thread, a document, an image, a log file, or another type of file.
Add a hyperlink to Web site or to a file that is stored on a server or Web site.
Question No: 39 DRAG DROP
You are using Microsoft Test Manager (MTM) to manage customer service bug reports.
A customer has reported a problem and provided documentation of the steps to reproduce the problem.
You need to use exploratory testing to create a bug and associate the bug to a new test case.
What should you do? (To answer, move the five appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Box 1: Start an exploratory test session and perform the steps to reproduce the bug. In the Exploratory Testing window, choose Start.
Run the application and explore its features. For example, open a web browser and log in to your website.
Box 2: From the exploratory test window, create a bug. When you find flaws in the application, choose Create bug.
Box 3: Add a title, optionally, edit the new bug.
Box 4: From the bug, use the Save and create test option to create the test case. Box 5: Add a title and, optionally, edit the new test case.
Question No: 40 DRAG DROP
You are using Microsoft Test Manager (MTM) to track bugs that have been found during testing.
You need to verify a bug by re-running the test case associated with the bug.
Which actions should you perform? (To answer, move the five appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Box 1: Navigate to the Testing Center. Box 2: Select the Test Activity.
Box 3: Select the Verify Bugs view.
Box 4: Select the bug with an associated test result. Box 5:Click Verify.
To verify that a bug is fixed
->Open Microsoft Test Manager.
->To run the test, choose the down-arrow on the center group switcher and then choose Testing Center.
->On the center group menu bar, choose Test.
->To view the bugs assigned to you, choose Verify Bugs.
The Verify Bugs view is displayed. It lists all the bugs that are currently assigned to you.
->(Optional) To view the bugs that you created, choose Created by me.
->Select the bug that you want to verify, and then choose Verify.
Finally choose Start test to rerun this test.
Dumps4cert ExamCollection Testking Lowest Price Guarantee Yes No No Up-to-Dated Yes No No Real Questions Yes No No Explanation Yes No No PDF VCE Yes No No Free VCE Simulator Yes No No Instant Download Yes No No