[Free] 2018(Aug) Ensurepass Cisco 300-360 Dumps with VCE and PDF 21-30

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Cisco Official New Released 300-360
100% Free Download! 100% Pass Guaranteed!

Designing Cisco Wireless Enterprise Networks

Question No: 21

A customer has deployed an N N redundant wireless infrastructure. In this deployment, the access points have been salt and peppered between controllers. What configuration would be necessary to cut down on the use of mobility tunnels for voice clients?

  1. mobility anchor

  2. KIS based CAC

  3. media session snooping

  4. re-anchor roamed voice clients

Answer: D

Question No: 22

While performing a Layer 1 passive wireless site survey of a location an engineer detects several instances of low power frequency hopping interference, but cannot physically locate the interfering device or devices. Why is the engineer unable to locate the offending device or devices?

  1. The sources are nearby narrow-beam radar and are sweeping through the facility.

  2. The sources are PAN and are mobile.

  3. The sources are above the ceiling file and transmit intermittently.

  4. The sources are actually high-powered devices and transmit from off the site.

Answer: B

Question No: 23

An engineer is performing a predictive wireless design for a Parts Distribution Center, which requires data and location services. Which three requirements are inputs to the design? (Choose three.)

  1. access points with directional antennas

  2. continuous -67 dBm coverage from one access point

  3. overlapping -75 dBm coverage from three access points

  4. overlapping -67 dBm coverage from two access points

  5. access points in IPS mode

  6. continuous -72 dBm coverage from one access point

  7. access points in corners and along perimeters

Answer: B,C,G

Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS- DG/wifich5.html

Question No: 24

An engineer is conducting a location readiness test and wants a selected point to be considered location-ready. Which three possible configurations reflect the minimum number of APs needed? (Choose three.)

  1. One AP is resident in each quadrant surrounding the point-in-question.

  2. One AP per 1400 sq. ft. on the map.

  3. Two APs are resident in each quadrant surrounding the point-in- question.

  4. Four APs are deployed on the floor.

  5. Three APs are within 70 feet (21 meters) of the point-in- question

  6. Three APs are deployed on the floor.

Answer: A,D,E Explanation:

A point in a WLAN deployment is location ready if the following are all determined to be true:

At least four access points are deployed on the floor.

At least one access point is found to be resident in each quadrant surrounding the point-in- QUESTION NO:. At least one access point residing in each of at least three of the surrounding quadrants is located within 70 feet of the point-in-QUESTION NO:.


http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Ac cess/ CMX/CMX_LocFund.pdf

Question No: 25

When conducting a wireless survey at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB. When configuring Cisco Prime Infrastructure, which obstacle should be placed in a map editor to represent the impact the glass wall will have on the RF signal in the facility?

  1. heavy door

  2. thick wall

  3. glass

  4. light wall

Answer: D

Reference: http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1- 2/configuration/guide/ pi_12_cg/maps.html Table 6-4

Question No: 26

An engineer is installing a wireless network in an industrial area with extreme temperatures

and a significant amount of dust. Which enclosure should be used to protect the APs?

  1. ACU

  2. ADU

  3. NEMA

  4. WLSE

Answer: C Explanation:

Sometimes access points (APs) are located in areas where they are subject to extreme moisture, temperatures, dust and particles. These APs might need to be mounted inside a sealed enclosure. The NEMA has a rating system for these enclosures, which are generally called NEMA enclosures.

Reference: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-


Question No: 27

You have a customer that is building a new campus of four 3-story buildings that you have just completed the site survey for. The customer is interested in the mount of rack space they will need to allocate in either the building MDF or in the data center for controllers.

Each building is going to require 75 APs to support voice and data. How should the controllers be deployed to provide the least number of controllers, the highest redundancy, and the easiest management?

  1. Use the centralized deployment method in the data center with the N N redundancy method.

  2. Use the centralized deployment method in the data center with the N 1 redundancy method

  3. Use the centralized deployment method in the data center with the 1 1 redundancy method and clientSSO.

  4. Use the distributed deployment method in each building MDF with the N 1 redundancy method.

  5. Use the distributed deployment method in each building MDF with the N N 1 redundancy method.

  6. Use the distributed deployment method in each building MDF with the N N redundancy method.

Answer: C

Question No: 28

An engineer is assigned to assist a customer by estimating the number of access points needed to provide voice-grade wireless coverage in a carpeted office space. How many access points should be estimated to cover this space of roughly 38,000 square feet?

  1. 17

  2. 10

  3. 6

  4. 13

Answer: D Explanation:

The rule of thumb coverage plan is 1 AP per 5,000 square feet for data and 1 per 3,000 square feet for voice and location services.

Reference: http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-


Question No: 29

Which two options describe best practices that must be completed after a wireless installation is finished?

(Choose two.)

  1. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller isinstalled.

  2. Consult with the customer to ensure that the IT staff has a complete set of design and installationdocuments.

  3. Make sure the customer is aware that they should consider purchasing a support contract immediately afterthe installation is complete.

  4. Spend time with the customer to show them the controller GUI and inform them how they can reach theCisco TAC if they have any problems.

  5. Test all the customer’s wireless devices and applications to ensure they are working properly.

Answer: B,E

Question No: 30

A customer wants to implement a wireless network in a historic location, but is concerned about the structural and aesthetic impact to the facility. Which benefit of using wireless mesh addresses these concerns?

  1. Power is required only at the installation location.

  2. The APs do not have LED lights.

  3. More wireless channels can be supported.

  4. APs do not need network connections.

Answer: D

100% Ensurepass Free Download!
300-360 PDF
100% Ensurepass Free Guaranteed!
300-360 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.