[Free] 2018(Aug) Dumps4cert Microsoft 70-981 Dumps with VCE and PDF Download 101-110

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Microsoft Official New Released 70-981
100% Free Download! 100% Pass Guaranteed!

Recertification for MCSE: Private Cloud

Question No: 101 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 infrastructure.

The network contains an Operations Manager infrastructure and a Virtual Machine Manager (VMM) infrastructure.

You implement a Microsoft SharePoint Server 2010 farm that is hosted on 10 virtual machines.

The company defines a service level agreement (SLA) for the farm#39;s availability of at least

99.9 percent uptime.

You need to ensure that the company#39;s compliance officer can identify whether the SLA requirement is met.

What should you do?

  1. Create a group, and then add all of the farm servers to the group. Create a Service Level Tracking object.

    Add a service level objective (SLO), and then set the goal to 99.9 percent.

  2. Create a group, and then add all of the farm servers to the group.

    Create a performance collection rule for each front-end Web server in the farm. Configure an alert if network availability falls below 99.9 percent.

  3. Create a distributed application that contains the servers and the services used by the farm.

    Create a Service Level Tracking object for the distributed application.

    Add a service level objective (SLO), and then set the goal to 99.9 percent.

  4. Create a distributed application that contains the servers and the services used by the farm.

Create a performance collection rule for each front-end Web server in the farm. Configure an alert if network availability falls below 99.9 percent.

Answer: C

Explanation: http://technet.microsoft.com/en-us/library/hh230719 http://technet.microsoft.com/en-us/library/hh457612.aspx

Question No: 102 HOTSPOT – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 infrastructure.

You plan to deploy a single-tier service to the private cloud.

The service is configured to use Network Load Balancing (NLB).

You need to create a Hardware Profile for the virtual machines that will be added to the service template.

The solution must ensure that the virtual machines will use Windows Network Load Balancing.

Which settings should you configure in the Hardware Profile? To answer, configure the four appropriate settings in the dialog box in the answer area.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Explanation:

Connected to Logical Network Static IP (from a static IP Pool) Static Mac Address

Check quot;Enable spoofing of MAC addressesquot; http://technet.microsoft.com/en-us/library/hh335098.aspx

The only potential issue is that when using System Center 2012 without SP1 checking the quot;Enable spoofing of MAC Addressesquot; doesn#39;t actually enable it. It has a bug: Instead it must be done from the command line but the question doesn#39;t mention what SP your System Centre is at.

Question No: 103 DRAG DROP – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure. The infrastructure contains a management server named Server 1.

The network contains two subnets named Subnet1 and Subnet2. The two subnets are separated by a firewall that prevents SNMP communications.

Server1 is located on Subnet1.

A switch named Switch1 is located on Subnet2. Switch1 has the following configurations:

->Network ID: 172.23.1.0/23

->IPv4 address: 172.23.1.55

->IPv6 address: fec0:2308::12

You need to discover Switch1.

What should you configure from the Computer and Device Management Wizard?

To answer, drag the appropriate values to the correct locations in the answer area. (Each value may be used once, more than once, or not at all.)

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

Dumps4Cert 2018 PDF and VCE

Section: Operations Manager

Explicit discovery – An explicit discovery rule will only attempt to discover those devices that you explicitly specify in the wizard by IP address or FQDN. It will only monitor those devices that it can successfully access.

The rule will attempt to access the device by using ICMP, SNMP, or both depending on the configuration of the rule.

http://technet.microsoft.com/en-us/library/hh212935.aspx

Question No: 104 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure.

You plan to create a distributed application named DistributedApp1.

You need to ensure that a folder for DistributedApp1 is available from the Monitoring workspace in the Operations Manager console.

What should you do?

  1. Add the OperationsManagerAppMonitoring object to DistributedApp1.

  2. Save DistributedApp1 as a new management pack.

  3. Add the OperationsManagerMonitoringView object to DistributedApp1.

  4. Save DistributedApp1 in the Default Management Pack.

Answer: B Explanation:

The Default Management Pack file contains common elements such as views at the top level of the Monitoring workspace.

This is an unsealed management pack file so that you can create views and folders at this level.

It should not be used for any other purpose.

For creating elements such as monitors and rules, create a new management pack file.

Selecting a Management Pack File http://technet.microsoft.com/en-us/library/hh457560.aspx The Default management pack that ships with

OpsMgr 2007 is used to store very specific information for the management group.

It is a widely known best practice to NOT write any custom rules, monitors, groups, views, or overrides to this MP.

Even customers who know this – and try to enforce this across their organizations….

will still inadvertently get junk in their default MP…. they will save things here by accident, or by granting access to advanced operators who aren#39;t educated on this topic.

The main problem with doing so…. is that we will build a dependency for this MP on any MP it references….and therefore we wont ever be able to delete those management packs, until we clean this Default MP up, and start enforcing best practices. http://blogs.technet.com/b/kevinholman/archive/2008/11/11/cleaning-up-the-default- mp.aspx

Question No: 105 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure.

The private cloud has a connection to a partner company. The connection uses a router named Router1.

Router1 is owned by the partner company.

The partner company#39;s security policy states that only partner company network administrators can access the configuration information of the partner company#39;s network devices.

You need to monitor the availability of Router1.

The solution must meet the security policy requirement.

Which access mode should you configure to discover Router1?

  1. ICMP

  2. SNMPv3

  3. SNMPv1 and SNMPv2

  4. ICMP, SNMPv1, and SNMPv2

  5. ICMP and SNMPv3

Answer: A Explanation:

It says we must not access the configuration information of the partner company#39;s network devices. So SNMP is not a choice, because it will give us just that.

To monitor the availability, in other words the online/offline status of the device, we may use ICMP.

Of course the device must answer to our ICMP requests like quot;pingquot;, but that is not part of the question.

Question No: 106 – (Topic 8)

Your company has a datacenter in Los Angeles.

The datacenter contains a private cloud that is managed by using a System Center 2012 infrastructure.

A server named VMM1 hosts the System Center 2012 Service Manager management server. A server named Server2 hosts the System Center 2012 Orchestrator management server.

You plan to use a runbook named Book1 to update the status of Service Manager incidents.

You need to ensure that you can create Book1, and then reference the runbook in Service Manager.

What should you do? (Each correct answer presents part of the solution. Choose all that apply.)

  1. From the Service Manager Console, add an incident event workflow.

  2. From the Service Manager Shell, run the Set-SCDWJobSchedulecmdlet.

  3. From the Orchestrator Deployment Manager, register the Integration Pack for System Center Service Manager.

  4. From the Service Manager Console, create an Orchestrator connector.

  5. From the System Center 2012 Orchestrator Runbook designer, create a connection.

  6. From the Service Manager Shell, run the Enable-SCDWJobSchedulecmdlet.

Answer: C,D,E Explanation:

Install the integration pack for SCSM on Orchestrator and configure the connection settings (SCSM server name, User, Password)

Create a new runbook

First activity -gt; quot;Monitor Objectquot; of SCSM integration pack -gt; Incident Class -gt; On Update –

gt; Filter quot;Support Groupquot; not equal quot;Tier 1quot;

Add 6 quot;Send Emailquot; activities -gt; 6 different recipients -gt; add the text in each mail body Link all 6 quot;Send Emailquot; activities with the first quot;Monitor Objectquot; activity

On each link delete the default rule quot;On successquot;

Add a new criteria -gt; Choose the quot;Support Groupquot; from the data bus -gt;criteria of the first link quot;Support Groupquot; equals quot;Tier 2quot;

Do the same with the other Links and Support Groups.

Check in and start the runbook http://social.technet.microsoft.com/Forums/en/administration/thread/ea41a3a4-0b40-47ee- 9ecc-a2ecab8794bf

To create an Orchestrator connector

In the Service Manager console, click Administration.

In the Administration pane, expand Administration, and then click Connectors.

In the Tasks pane, under Connectors, click Create Connector, and then click Orchestrator connector.

Perform these steps to complete the Orchestrator Connector Wizard: On the Before You Begin page, click Next.

On the General page, in the Name box, type a name for the new connector. Make sure that Enable this connector is selected, and then click Next.

On the Connection page, in the Server Information area, type the URL of the Orchestrator Web service, depending on which version of Orchestrator you are using:

For Orchestrator Beta, type the URL of the Orchestrator Web service in the form of http://lt;computergt;:lt;portgt;/

Orchestrator.svc, where lt;computergt; is the name of the computer hosting the web service and lt;portgt; is the

port number where the web service is installed. (The default port number is 81.) For Orchestrator RC, type the URL of the Orchestrator Web service in the form of http://lt;computergt;:lt;portgt;/

Orchestrator2012/Orchestrator.svc, where lt;computergt; is the name of the computer hosting the web service and lt;portgt; is the port number where the web service is installed. (The default port number is 81.)

On the Connection page, in the Credentials area, either select an existing account or click New, and then do the following:

In the Run As Account dialog box, in the Display name box, type a name for the Run As account. In the Account list, select Windows Account. Enter the credentials for an account that has rights to connect Orchestrator, and then click OK. On the Connection page, click Test Connection.

Note

Special characters (such as the ampersand [amp;]) in the User Name box are not supported. In the Test Connection dialog box, make sure that the message “The connection to the server was successful” appears, and then click OK. On the Connection page, click Next.

On the Folder page, select a folder, and then click Next.

On the Web Console URL page, type the URL for the Orchestrator web console in the form of http://lt;computergt;:port (the default port number is 82), and then click Next.

On the Summary page, make sure that the settings are correct, and then click Create.

On the Completion page, make sure that you receive the message “Orchestrator connector successfully created,” and then click Close.

To validate the creation of an Orchestrator connector

In the Connectors pane, locate the Orchestrator connector that you created. Review the Status column for a status of Finished Success.

Note

Allow sufficient time for the import process to finish if you are importing a large number of runbooks.

In the Service Manager console, click Library.

In the Library pane, expand Library, and then click Runbooks.

Review the Runbooks pane, and note that your runbooks have been imported. http://technet.microsoft.com/en-us/library/hh519779.aspx

The Integration Pack for System Center Service Manager is an add-in for Opalis Integration Server 6.3 that enables you to use System Center Service Manager to coordinate and use operational data in an existing IT environment comprised of service desk systems, configuration management systems,, and event monitoring systems,, including specifically BMC Remedy IT Service Management Suite, BMC Atrium, and HP Service Manager 7 and HP Service Center 6.2.

With this integration pack, you can also create workflows that interact with and transfer information to the integration packs for System Center Operations Manager, System Center Data Protection Manager, System Center Configuration Manager, and System Center Virtual Machine Manager.

Opalis, a Microsoft Subsidiary, is committed to helping you protect your privacy, while delivering software that brings you the performance, power, and convenience you want. For more information, seetheOpalis 6.3

Privacy Statement (http://go.microsoft.com/fwlink/?LinkID=202690). http://technet.microsoft.com/en-us/library/gg464964.aspx

Question No: 107 – (Topic 8)

Your company has a private cloud that is managed by using a System Center 2012 infrastructure.

You plan to monitor a Microsoft .NET application named App1 that is hosted in the private cloud.

You need to import the management packs required to monitor the application. Which management packs should you import?

  1. the Windows Server 2008 Operating System (Monitoring) management pack and the Operations Manager APM Web IIS 7 management pack

  2. the Windows Server 2008 Operating System (Discovery) management pack and the Windows Server 2008 Internet Information Services Management Pack

  3. the Windows Server Internet Information Services 7 Management Pack and the Operations Manager APM Web IIS 7 management pack

  4. the Windows Server Operating System management pack and the Windows Server 2008 Internet Information Services Management Pack

Answer: C Explanation:

Import the IIS 7.0 management pack (Microsoft.Windows.InternetInformationServices.2008.mp) and the Operations Manager APM Web IIS 7 management pack (Microsoft.SystemCenter.Apm.Web.IIS7.mp).

The Microsoft.SystemCenter.Apm.Web.IIS7.mp management pack is included in the download package in the Management Packs folder-it is not available on the management pack catalog.

For information about importing management packs, see Import a Management Pack. Additionally, ensure that IIS 7.0 websites, applications, and services have been discovered. http://technet.microsoft.com/en-us/library/hh543994.aspx

Question No: 108 – (Topic 8)

Your company has a private cloud that contains a System Center 2012 R2 infrastructure.

You have a server named Server1 that runs Windows Server 2012 R2. Server1 hosts a Java-based application.

You need to ensure that you can monitor exceptions generated by the application.

Which three actions should you perform? Each correct answer presents part of the solution.

  1. Deploy the Java Application Performance Monitoring agent to Server1.

  2. Import the Management Pack for Java Application Performance Monitoring (APM).

  3. Deploy JavaBeans to Server1.

  4. Import the Management Pack for Java Enterprise Edition (JEE).

  5. Deploy JavaBeans to the Operations Manager server.

    Answer: A,B,D

    Question No: 109 DRAG DROP – (Topic 8)

    You plan to automate a task by using System Center 2012 Orchestrator.

    You create a new runbook that uses multiple input parameters and invokes a nested runbook.

    You need to verify that the runbook executes successfully. Which three actions should you perform in sequence?

    (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    http://technet.microsoft.com/en-us/library/hh403809.aspx

    It is clearly said that when we open the runbook in the designer and then start the runbook tester we#39;ll be asked to check out. That is BEFORE we quot;start the runbook from the runbook testerquot;.

    http://www.youtube.com/watch?v=q40SsMs7NMs

    After having startet the runbook in the runbook tester we#39;ll be asked for input parameters.

    Question No: 110 HOTSPOT – (Topic 8)

    You manage a System Center 2012 R2 Operations Manager deployment. The deployment contains a server named Server1 that runs Windows Server 2012 R2.

    You discover an alert for Server1 generated by a monitor named Monitor1. Monitor1 does not implement on-demand detection.

    When you troubleshoot the cause of the alert, you discover that the issue causing the alert was resolved.

    You need to ensure that once you close the alert, an alert will be generated if the same

    issue reoccurs.

    What should you do before closing the alert? To answer, select the appropriate options in the answer area.

    Dumps4Cert 2018 PDF and VCE

    Answer:

    Dumps4Cert 2018 PDF and VCE

    Explanation:

    Dumps4Cert 2018 PDF and VCE

    To close an alert that is generated by a monitor (see step 4 and 5 below)

    ->Read the alert and examine its properties. Check the alert details to determine if the alert was generated by a monitor or a rule. Use the product knowledge for the alert to help determine the cause of the alert.

    ->Troubleshoot the cause(s) of the alert and take the actions needed to resolve the problem.

    ->When the problem is resolved, click Source in the alert details. This will open

    the State view for the object associated with the alert.

    ->Right-click the object, point to Open, and then click Health Explorer for object name.

    ->Select the monitor that generated the alert and click Reset Health on the toolbar.

    Close the Health Explorer and the State view.

    ->Refresh the alerts view. If the alert is still listed, click the alert and then click Close Alert in the Actions pane.

    100% Dumps4cert Free Download!
    70-981 PDF
    100% Dumps4cert Pass Guaranteed!
    70-981 Dumps

    Dumps4cert ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.