2019 Free Microsoft EnsurePass 300-135 Dumps VCE and PDF Download Part 4

EnsurePass
Exam Dumps
300-135 Dumps VCE and PDF
2019 300-135 Dumps VCE and PDF

 

QUESTION 31

Refer to exhibit. The tunnel between R2 and R5 is not coming up. R2, R4 and R5 do not have any routing information sources other than OSPF and no route filtering is implemented anywhere in the network. Which two actions fix the issue? (Choose Two)

 

image017

 

A.

Redistribute connected routes to OSPF on R5.

B.

Change the tunnel destination on R2 to 192.168.2.1

C.

Advertise interface Lo0 to OSPF on R5.

D.

Configure a static route on R5 to 2.2.2.2 via 192.168.2.1

E.

Fix the OSPF adjacency issue between R2 and r5.

 

Correct Answer: AC

Explanation:

In order for the tunnel to be established between R2-R5 ,the R2 should have a path for the 5.5.5.5/32 route in its own routing table , and because the ospf is the only routing protocol here , so R5 has to advertise the route 5.5.5.5/32, and that is possible through these option:

 

1-redistribute connected route to ospf on R5

2-Advertise interface lo0 to OSPF on R5

 

For knowing more about the rules for the gre channel to be established, check the link below:

 

http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/118361-technote-gre-00.html

 

 

QUESTION 32

Refer to exhibit. After a junior technician configures a new branch office GRE tunnel, which step is missing from the configuration to pass traffic through tunnel on Router 1?

 

image019

 

A.

static route to 10.0.3.0/24 via 10.0.1.1

B.

static route to 10.0.3.0/24 via 10.0.2.1

C.

static route to 10.0.3.0/24 via 190.0.4.1

D.

static route to 10.0.3.0/24 via 190.0.4.2

 

Correct Answer: D

 

 

QUESTION 33

On which two topologies can you deploy a point-to-point GRE over IPsec design? (Choose two.)

 

A.

bus

B.

partial-mesh

C.

hub-and-spoke

D.

ring

E.

tree

 

Correct Answer: BC

 

 

QUESTION 34

Which two conditions can you use to filter the output of the debug condition command? (Choose two.)

 

A.

interface ID

B.

port number

C.

packet size

D.

protocol

E.

username

 

Correct Answer: AE

 

 

QUESTION 35

Refer to the exhibit. Your company security policy states you must use SSH on your network devices. Your attempt to SSH into SW3 is unsuccessful. What action must you take to correct the issue?

 

SW3#sho run | sec vty

line vty 0 4

access-class 100 in

login

transport input ssh

 

SW3#sho access-list

Extended IP access list 100

10 deny tcp any any eq 22

20 permit ip any any

Extended IP access list 150

10 permit tcp any any eq telnet

20 deny tcp any any eq 22

30 permit ip any any

Extended IP access list 175

10 permit tcp any any eq 22

20 permit tcp any any eq telnet

 

A.

Change access-class 100 in to access-class 175 in.

B.

Change access-class 100 in to access-class 150 in.

C.

Change access-class 100 in to access-class 100 out.

D.

Change transport inut ssh to transport input telnet

 

Correct Answer: A

 

 

QUESTION 36

Which three protocols or protocol combinations does Management Plane Protection (MPP) support? (Choose three.)

 

A.

SFTP

B.

SSH

C.

Both HTTP and HTTPS

D.

FTP

E.

Only HTTP

F.

OSPF

 

Correct Answer: BCD

 

 

QUESTION 37

Refer to the exhibit. When troubleshooting an adjacency issue on router R1, you generated the given debug output. Which two values are mismatched between R1 and its neighbor? (Choose two.)

 

image021

 

A.

hello timer settings

B.

metric calculation mechanisms

C.

authentication parameters

D.

autonomous system numbers

E.

hold timer settings

 

Correct Answer: BD

 

 

QUESTION 38

You want to troubleshoot an OSPF adjacency issue. Which two tasks must you perform? (Choose two.)

 

A.

Issue the debug ip ospf nsf command to identity the cause.

B.

Issue the debug ip ospf adj command to identify the cause.

C.

Verify that the router IDs on the two routers match.

D.

Verify that the subnet masks on the two routers match.

E.

Verify that the process IDs on the two routers match.

 

Correct Answer: BD

 

QUESTION 39

Which IPsec mode encrypts a GRE tunnel and adds the least amount of overhead?

 

A.

tunnel

B.

transport

C.

dynamic

D.

transparent

 

Correct Answer: B

 

 

QUESTION 40

Which protocol does mGRE use to determine where packets are sent?

 

A.

CEF

B.

EIGRP

C.

NHRP

D.

DMVPN

Correct Answer: A

Explanation:

https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/41940-dmvpn.html

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.